Spruce up your flight simulator cockpit with this 6-lever quadrant panel. Stop tapping keys on your keyboard to adjust throttle, pitch, etc., and increase your sim immersion! Perfect for the DIY cockpit builder! This is an expansion of our existing quadrant lever, ganged together and mounted to a panel, ready for installation in your cockpit. The panel is 3-D printed from black PLA plastic, and 6 quadrant levers are ganged together and mounted to the underside. It can be used as-is, or painted in the order color of your choosing. Our quadrant levers are geared, so as to use the full travel of the potentiometer, and include a spring-loaded brake so the lever stays where you leave it. The handle and knob are our standard 94mm long version, but can be swapped for different lengths as needed. Each quadrant uses a high quality 50 Kohm potentiometer, and can be unwired, or pre-wired with a 3 foot long cable that can be connected to any joystick controller (controller not included). Of course, we hope you'll use one of ours, available here on this site.
Comes with knobs shown here, but let us know when you place the order if you wish to substitute colors. Available knob colors are Black, Red, Yellow, Blue, and Gray.
Dimensions are:
124mm x 186mm bezel, and depth is 60mm from the bottom of the bezel to the potentiometer leads.
Instrument panel cutout should be 106mm x 155mm.
Product code: Order Gear-Falcon Generic 6-Gang Quadrant Panel