04 Titanium ring glow in order the dark, modern symbol

Ring Type : 04
Titanium ring glow in the dark blue color engraved with modern symbol.
Resin color and glow in the dark color : see option
Width: 8 mm
Thickness: About 1.8mm
Exterior finish: Satin
Interior finish: Polished
Interior engraving: Free
Delivered and presented in a soft suede pouch

Important: To Read
Titanium ring encrusted with high performance phosphorescent pigment resin.
Ideally activated by a “UV” lamp or by the sun. (Possible with a classic led lamp but the result is less powerful).
Service life: about 20 years; Can be activated an infinite number of times.
High quality inlay: Ring deeply engraved on my CNC machine then sandblasted for a good grip of the resin. (It is not a simple paint applied).
Important and valid for phosphorescent pigments color: The "spectacular" shine effect in the night only lasts a few minutes (around 5 minutes). The shine effect then decreases slowly over the minutes but remains visible in total darkness for almost 1 hour or more.
For information, a phosphorescent effect can never last long. You have to recharge it after a few minutes for a really visible effect. Green phosphorescent pigments are the brightest while red and purple have the shortest shine duration.

IMPORTANT:
PLEASE READ THE FOLLOWING BELOW. IN FACT, OUR TITANIUM RINGS ARE UNIQUE AND MADE ON DEMAND. IN THE EVENT OF ANY PROBLEM, CONDITIONS WILL APPLY.


TITANIUM VS TUNGSTEN
Titanium is a very interesting material for the manufacture of rings because it is the only 100% hypoallergenic material (it is also used for dental implants).
It is therefore not at all harmful unlike tungsten rings which contain 10% nickel but that is never said!
In addition, there is no risk of breaking because it is a "malleable" material, unlike tungsten. Tungsten rings are very scratch resistant but can break if impacted or sometimes for no reason.
Please note: Titanium rings are very light, about twice as light as a conventional metal ring; But that doesn't change its strength and quality.


EXCHANGE / REFUND / SIZING
For any problem, please contact us first as it is always possible to find a solution.
Proper sizing is not possible on a titanium ring because the metal is not as malleable as gold or silver. To change the size of a ring (too small or too large), we have to make a new one. If you are unsure of your size, we recommend that you have your finger measured or order a ring sizer on internet.
Our titanium rings are made on request and are made to measure; An exchange, a refund or an adjustment is possible but we ask for a financial contribution of 50% of the price of the ring and the return costs will be at your expense.
In the event of an error on our part (engraving, size, model) all costs will be borne by us.
We specify that each ring is photographed on a mandrel and that this will serve as proof in the event of a dispute.


CUSTOMIZATION
It may be possible to customize some model. For example, changing a color or the width of a ring. Additional charges may apply depending on the model. Please contact us, but note that this may increase manufacturing times. We reserve the right to refuse a personalization if we are in a good time or if it is too complex.


MINERAL / FOSSIL / METEORITE / OPAL / PRECIOUS METALS INFORMATION
All the materials we use for the inlays are natural and authentic except for the powder which glows in the dark and the opal which is created in the laboratory.
All its materials are crushed by us and calibrated in several sizes.
We draw your attention to the TURQUOISE stone which is becoming increasingly rare, expensive and often imitated. We only work with real TURQUOISE that we bring in from Arizona.
All minerals, fossils, meteorites or the like are also authentic. It is difficult to prove it, especially after inclusion, but we do our best to take photos of each material as proof; Then it will be quite easy for you to compare, for example, a photo of a piece of meteorite with the one in our shop; In addition we only work with trusted suppliers based in Europe and the USA. We do not offer a certificate of authenticity because it is very easy to make a fake or a real one and therefore we do not see the point.


PHOSPHORESCENT POWDER INFORMATION
You have to understand that a glow-in-the-dark ring pattern is more of an option than a proper pattern.
The powder embedded in the ring reacts with UV rays from the sun or from a small ultra violet lamp. The duration of the effect can vary a lot from a few minutes to a few hours.
The strength of the glow-in-the-dark effect will depend on several factors. From the model itself, the color chosen (green and blue are the brightest), the exposure time and the mode of exposure. A small UV lamp will usually work better than exposure to the sun.
For information, the lifespan of phosphorescent powder is several tens of years.


INTERIOR ENGRAVING
We can engrave a short text inside your ring free of charge. Engraving is fairly straightforward and we don't offer a choice of font. Please click here for more information.


DELIVERY
Our rings can be delivered in FRANCE and worldwide for free as a single letter with a tracking number. Delivery times vary .We don't offer delivery via DHL or EXPRESS.
Approximate delivery times (excluding manufacturing time):
- For France 2 to 3 days.
- For Europe 3 to 6 days.
- For the USA and the rest of the world, 5 to 10 days.



MANUFACTURING DEADLINE
The manufacturing time for a titanium order ring may vary depending on the period and demand. You should allow an average of 1 week between the time you order and the time we make your ring.


STOCK PROBLEM
We are a dynamic shop and work with a lot of different materials.
It may therefore happen that we are out of stock on certain minerals or metals. You will be notified as quickly as possible and you will decide to be reimbursed or to wait. The deadlines will be indicated to you.


RINGS MANUFACTURING
All our titanium rings are made to order in our workshop in France (near Paris). Each ring is therefore unique.
They are not prefabricated in China like most Tungsten Carbide rings where you just need to add inclusion.
Each titanium ring is cut to the correct width and the inside of the ring and the outside are shaped in our workshop.
Each inclusion groove is made precisely, then sanded for very good hold over time.


FINISH INCLUSION
It's important to note that a "handcrafted inclusion" can never be perfect. If you look very closely (or with a magnifying glass), small flaws like micro scratches or a few holes (air bubbles) are visible. It is impossible to avoid this phenomenon and we cannot accept a return for this reason. Indeed, we have a certain tolerance and if there are too many small defects, we start the ring again.


SHOOTING / DIFFERENCE WITH MODEL RECEIVED
All our shots are taken in a "light box" with a reflex type camera. All adjustments are made for the most accurate color reproduction possible and no image is retouched with Photoshop except for the layout.
Despite everything, we work with materials (minerals, fossils) whose color may vary even coming from the same region.
In addition, with each ring being unique, and each inclusion being handmade, there is a great chance that the model pictured will be a little different from the model you will receive. This difference is more or less accentuated depending on the model but we always do our best to keep this difference acceptable.


RING SIZE / MEASURE YOUR FINGER
We offer a wide choice of sizes. Being based in France, we offer French ring sizes. It is easy to convert the different ring sizes to French / US / UK (See drop-down menu).
In France, the ring size is the inner circumference of the ring in mm.
Example: Size 60 Fr = inner circumference of 60 mm.
To order a ring, it is very important to know its exact size and not the approximate size because you have a 3 in 4 chance of making a mistake.
If you have a ring but do not know your size, we recommend that you measure it with a caliper and not with a ruler.
Example: You measure with the 19.1 mm tool. 19.1x3.14 = 59.97 mm = Size 60 Fr = Size 9.25 Us.
If you do not know your size at all, we recommend that you have your finger measured at a jeweler or order a plastic ring sizer on the Internet.
It is important to note that even with all of these precautions, you could make a mistake; In fact, the fingers can swell or shrink slightly during the day with heat and humidity. Also, if you test with a 3mm wide plastic ring and order an 8mm wide ring, the feeling on your finger is different and therefore may result in a size error.
Measuring a finger is therefore not an exact science, but we advise you, if in doubt, to always choose the size below.


GUARANTEE
It is difficult to guarantee jewelry, but our titanium rings are guaranteed for one year against any manufacturing defect. It is important to note that despite the resistance of titanium, the polished parts will end up with a patina with shocks and micro scratches. The warranty does not cover scratches and we advise people who want to keep the appearance of their ring to remove it with each "risky" manual activity.
On the other hand, we assure you that each ring is shaped in the most rigorous way possible. Plus a titanium ring will never rust or tarnish. It will never cause you an allergy and it cannot be broken. It can eventually warp, but under the impact of a big shock. The resistance of the inserts and inclusions is also guaranteed subject to "normal" use.


METAL INSERT (COPPER / GOLD / SILVER)
As you can see from the picture, the metal inserts are very fine wires coiled and inserted into the ring.
We use a special and delicate technique but you should know that the final junction will always remain visible even if it remains discreet.