Wine Barrel Stave Hat, Coat, Scarf, Towel, Jewelry Holder. order FREE SHIPPING

WINE BARREL STAVE COAT, HAT, SCARF, TOWEL, JEWELRY, POTS & PANS HOLDER

This hand-crafted and beautiful coat/hat rack is made from a used solid oak wine barrel stave. The hooks are old railroad spikes. The stave is sanded and stained and garnished with pieces of the barrel ring. The railroad spikes are sealed. This piece is not only functional but beautiful and a conversation piece. One version shows off the "bung hole" where wine was once poured from the barrel. We also offer a single spike version to complement the large version.

Options:
4-spike Without Bung Hole in the center (35-37L x 3-1/2 to 4 W x 5-1/2 to 6H)

4-spike With Bung Hole in the center (35-37L x 3-1/2 to 4 W x 5-1/2 to 6H)

3-spike no hole in center (26L x 4W x 6H)

2-spike no center hole (18L x 4 W x 5H)

Single Spike Holder (9L X 4W X 4-1/2 H)

Size: . Ships by UPS or USPS.

Mounting hardware and instructions included.

NOTE: order Each barrel is unique and different in characteristics from every other including the markings from the barrel maker or winery, stave length, stave markings and width. Pictures shown in this listing may vary from actual product. Every product is hand-crafted and one-of-a-kind.

This piece can be modified to meet your specific needs as a custom order. Proudly hand-crafted in Fredericksburg, Texas, heart of Texas wine country.

Local Pickup: To save shipping charges, local pickup in Fredericksburg TX is available. Reverse shipping charges by entering LOCALPICKUP in the coupon box. Once you add an item to your cart, click Apply shop coupon code above Item total.

INSTALLATION INSTRUCTIONS
1.Remove screws from metal banding to expose mounting holes
2.Place unit on wall and level
3.Place a provided 2-1/2” screw in each hole and tap lightly with a hammer, making a mark
4.Drill a 5/16” hole and place a wall anchor in each hole, tapping in with a hammer
5.Insert 2-1/2” screw in each mounting hole and into wall anchor and tighten
6.Replace the four screws in metal banding to cover mounting holes